(800) 330-2526
E-PECK® COLLECTION
BY SYNERGY WOOD™ PRODUCTS
E-Peck® Collection: Our proprietary E-Peck® process creates the natural,
rare pecky appearance in Southern Pine boards.
CALL FOR QUOTE TODAY (561) 585-2525 or (800) 330-2526
PREFINISHED SHIPLAP - E-PECK® COLLECTION BY SYNERGY WOOD™ PRODUCTS
PREFINISHED SHIPLAP - E-PECK® COLLECTION BY SYNERGY WOOD™ PRODUCTS
Prefinished Ceiling Boards and Prefinished Shiplap
E-PECK® COLLECTION
BY SYNERGY WOOD™ PRODUCTS
Pecky Cypress is a rare and highly prized wood. The unusual “pecky” pattern is caused by a fungus that attacks the heartwood of mature Cypress trees, creating an effect of pocketing and striation. When the Cypress timber is milled, the natural grooves and divots create a very unique and rustic look.
Because of the growing scarcity of Pecky Cypress, we developed a proprietary process that re-creates the rare pecky appearance consistently throughout each plank. E-Peck® is available in Southern Pine boards.
Our handcrafted Synergy E-Peck® wood planks are tongue and groove, end matched and hand finished to deliver a premium and durable finish that is easy to install with significantly less waste.
Each board has a 5” face (+/- 1/16th”) width. Available in V-Joint, Nickel Joint or Square Edge tongue & groove patterns. Packaged in 4 piece bundles.
BUILD YOUR BEST PROJECT WITH THESE BENEFITS
- Natural Rare Pecky Cypress Look
- Hand Selected & Prefinished
- Southern Pine
- Eight* Natural Artisan Colors
- No Sanding or Staining Required
- Tongue & Groove, End-Matched
- V-Joint, Square Edge & Nickel Joint Pattern
- Water-based, Zero VOC finish
- 100% Solid Wood Planks
- Proudly Handcrafted in America
- Easy to Install, Low Waste
CALL FOR QUOTE TODAY (561) 585-2525 or (800) 330-2526
E-PECK® SOUTHERN PINE
Southern Pine’s strength, value and character make it a great choice for ceilings and walls. Offered in #2 and C-Grade.
CALL FOR QUOTE TODAY (561) 585-2525 or (800) 330-2526
AUBURN E-PECK® SOUTHERN PINE
BORDEAUX E-PECK® SOUTHERN PINE
COLONIAL E-PECK® SOUTHERN PINE
EBONY E-PECK® SOUTHERN PINE
WEATHERED GRAY E-PECK® SOUTHERN PINE
T & G JOINT PATTERNS
Select from a variety of patterns.
All Synergy Wood products are made with tongue and groove joints. Tongue and groove is the preferred method of fitting our wood boards together, edge to edge. Tongue and groove joints allow two wood planks to be joined strongly together to make a single flat surface and conceal the effect of wood shrinkage. “Tongue and groove” is often abbreviated as T&G.
Each piece has a slot (the groove) cut all along one edge, and a thin, deep ridge (the tongue) on the opposite edge. The tongue projects a little less than the depth of the groove. Two or more pieces fit together closely.
Our wood boards are also end-matched. This method eliminates the need for additional joints, face nailing or the use of joints on framing.
V-JOINT
The term “V-Joint” comes from the “V” created when two of our T&G boards come together. They form a V between the two boards. The T&G V-Joint pattern is used in our very popular Synergy Collection. The V-Joint pattern is often used in our wood ceiling applications.
NICKEL JOINT “SHIPLAP” LOOK
The term “Nickel Joint” or Nickel Gap” comes from the old craftsmen using actual nickels to space the wood – the width of a nickel. Our T&G profile has a square edge profile with a 1/8″ gap between the boards to ensure a seamless nickel gap. Nickel gap also gives the appearance of Shiplap but with a much stronger joint, ability to blind nail (hide the nails behind joint) and still have end-matching. Nickel joint is a clean look that is often used on wood walls and in replace of a shiplap look.
SQUARE EDGE
“Square Edge” joint pattern allows the wood to butt up close to each other. Often referred to as a “butt joint” Square Edge removes larger gaps like the Nickel joint or V-Joint. Synergy Wood uses Square Edge joint patterns on our rustic or brushed wood products. With a rough sawn board, square edge can give the look of a slight gap and added dimension. Very popular for our interior wall boards.
V-JOINT
NICKEL JOINT
SQUARE EDGE
Call for details (561) 585-2525 or (800) 330-2526. We look forward to helping you!
Blumer & Stanton | What Our Customers Say
Doug
Felker
Charlotte
North Carolina
Found just what I needed via an online search of moulding images. I received two samples and purchased the one which looked the best for our application. The customer service was great and I received my moulding quickly and in excellent condition 4 pieces 8′ in length wrapped well.
Dorothy
R.
Fort Lauderdale
Florida
Very high quality millwork, excellent customer service. A small shipping issue was handled quickly and professionally. Highly recommended!!
Shipping Restrictions for E-Peck® Collection
Shipping of E-Peck® Collection is generally available to our South Florida Local Delivery Zones only.
Call for a custom quote to ship outside our local delivery zone: (561) 585-2525 or (800) 330-2526.
Local Pick Up
Orders may be picked up from our West Palm Beach location:
5112 Georgia Avenue, West Palm Beach, FL 33405
Click for Directions
Local Delivery in South Florida
Local deliveries to Palm Beach and Martin counties will incur a $25 delivery fee. Local deliveries to Indian River and Broward counties will incur a $75 delivery fee. Automatic Free Shipping on Orders Over $500.
